View FDB5690_1118761.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

fdp5690/FDB5690 fdp5690/FDB5690 re v . c ju ly 2000 ? 20 0 0 fairchild semiconductor inte rna tio n al fdp5690/FDB5690 60v n-channel power t renc h t m mosfet features ? 32 a, 60 v. r ds(on) = 0.027 ? @ v gs = 10 v r ds(on) = 0.032 ? @ v gs = 6 v. critical dc electrical parameters specified at evevated temperature. rugged internal source-drain diode can eliminate the need for an external zener diode transient suppressor. high performance trench technology for extremely low r ds(on) . 175 c maximum junction temperature rating. absolute maximum ratings t c = 25 c unless otherwise noted symbol parameter fdp5690 FDB5690 units v dss drain-source voltage 60 v v gss gate-source voltage 20 v i d maximum drain current - continuous 32 a - pulsed 100 total power dissipation @ t c = 25 c 58 w p d derate above 25 c 0.4 w/ c t j , t stg operating and storage junction temperature range -65 to +175 c thermal characteristics r jc thermal resistance, junction-to-case 2.6 c/w r ja thermal resistance, junction-to-ambient 62.5 c/w package marking and ordering information device marking device reel size tape width quantity FDB5690 FDB5690 13 ?? 24mm 800 fdp5690 fdp5690 tube n/a 45 s d g s g d to-220 fdp series d g s to-263ab fdb series general description this n-channel mosfet has been designed specifically to improve the overall efficiency of dc/dc converters using either synchronous or conventional switching pwm controllers. these mosfets feature faster switching and lower gate charge than other mosfets with comparable r ds(on) specifications resulting in dc/dc power supply designs with higher overall efficiency.
fdp5690/FDB5690 fdp5690/FDB5690 re v . c electrical characteristics t c = 25 c unless otherwise noted s y mbol parameter test conditions min t yp max units drain-source avalanche ratings (note1) w dss single pulse drain-source avalanche energy v dd = 30 v, i d = 32a 80 mj i ar maximum drain-source avalanche current 32 a off characteristics bv dss drain-source breakdown volta g e v gs = 0 v, i d = 250 a 60 v ? bv dss ? t j breakdown voltage temperature coefficient i d = 250 a, referenced to 25 c61mv/ c i dss zero gate voltage drain current v ds = 48 v, v gs = 0 v 1 a i gssf gate-body leakage current, forward v gs = 20 v, v ds = 0 v 100 na i gssr gate-body leakage current, reverse v gs = -20 v, v ds = 0 v -100 na on characteristics (note 1) v gs(th) gate threshold voltage v ds = v gs , i d = 250 a 22.4 4 v ? v gs(th) ? t j gate threshold voltage temperature coefficient i d = 250 a, referenced to 25 c -6.4 mv/ c r ds(on) static drain-source on-resistance v gs = 10 v, i d = 16 a, v gs = 10 v, i d = 16 a,t j = 125 c v gs = 6 v, i d = 15 a 0.021 0.042 0.024 0.027 0.055 0.032 ? i d(on) on-state drain current v gs = 10 v, v ds = 5 v 50 a g fs forward transconductance v ds = 5 v, i d = 16 a 32 s dynamic characteristics c iss input capacitance 1120 pf c oss output capacitance 1 60 pf c rss reverse transfer capacitance v ds = 25 v, v gs = 0 v, f = 1.0 mhz 80 pf switching characteristics (note 1) t d(on) turn-on delay time 10 18 ns t r turn-on rise time 9 18 ns t d(off) turn-off delay time 24 39 ns t f turn-off fall time v dd = 30 v, i d = 1 a, v gs = 10 v, r gen = 6 ? 10 18 ns q g total gate charge 23 33 nc q gs gate-source charge 3.9 nc q gd gate-drain charge v ds = 15 v, i d = 16 a, v gs = 10 v 6.8 n c drain-source diode characteristics and maximum ratings i s maximum continuous drain-source diode forward current ( note 1 ) 32 a v sd drain-source diode forward voltage v gs = 0 v, i s = 16 a (note 1) 0.92 1.2 v note: 1. pulse test: pulse width 300 s, duty cycle 2.0%
fdp5690/FDB5690 fdp5690/FDB5690 re v . c typical characteristics figure 1. on-region characteristics. figure 2. on-resistance variation with drain current and gate voltage. figure 3. on-resistance variation with temperature. figure 4. on-resistance variation with gate-to-source voltage. figure 5. transfer characteristics. figure 6. body diode forward voltage variation with source current and temperature. 0 10 20 30 40 50 60 70 80 0246810 v ds , drain-source voltage (v) i d , drain-source current (a) v gs = 10v 4.0v 5.0v 4.5v 6.0v 7.0v 0 0.01 0.02 0.03 0.04 0.05 0.06 345678910 v gs , gate to source voltage (v) r ds(on) , on-resistance (ohm) i d = 16a t a = 125 o c t a = 25 o c 0 10 20 30 40 50 60 23456 v gs , gate to source voltage (v) i d , drain current (a) t a = -55 o c 25 o c 125 o c v ds = 5v 0.0001 0.001 0.01 0.1 1 10 100 0 0 .2 0.4 0 .6 0.8 1 1.2 1 .4 v sd , body diode forward voltage (v) i s , reverse drain current (a) t a = 125 o c 25 o c -55 o c v gs = 0v 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 -50 -25 0 2 5 50 7 5 100 125 150 175 t j , junction temperature ( o c) r ds(on) , normalized drain-source on-resistance i d = 16a v gs = 10v 0.8 1 1.2 1.4 1.6 1.8 2 2.2 0 20406080 i d , drain current (a) r ds(on) , normalized drain-source on-resistance v gs = 4.0v 10v 5.0v 4.5v 6.0v 7.0v
fdp5690/FDB5690 fdp5690/FDB5690 re v . c typical characteristics (continued) figure 7. gate-charge characteristics. figure 8. capacitance characteristics. figure 9. maximum safe operating area. figure 10. single pulse maximum power dissipation. figure 11. transient thermal response curve. 0 400 800 1200 1600 0 102030405060 v ds , drain to source voltage (v) capacitance (pf) c iss c rss c oss f = 1mhz v gs = 0 v 0 500 1000 1500 2000 2500 0.01 0.1 1 10 100 1 000 single pulse time (ms) power (w) single pulse r jc = 2.6 o c/w ta = 25 o c 0.01 0.1 1 10 100 1000 0.01 0.02 0.03 0.05 0.1 0.2 0.3 0.5 1 t ,time (ms) transient thermal resistance single pulse d = 0.5 0.1 0.05 0.02 0.2 duty cycle, d = t /t 1 2 r (t) = r(t) * r r = 2.6 c/w jc jc jc t - t = p * r (t) jc c j p(pk) t 1 t 2 r( t ) , n o r m a li ze d e ffe c t iv e 1 0.01 0.1 1 10 100 1000 0.1 1 10 100 dc 10s 1s 100ms 10ms 1ms rds ( on ) limit v gs = 10v single pulse r jc = 2.3 o c/w t c = 25 o c i d drain current (a) v ds , drain-source voltage (v) 0 2 4 6 8 10 0 5 10 15 20 25 q g , gate charge (nc) v gs , gate-source voltage (v) i d = 16a v ds = 10v 20v 30v
to-220 tape and reel data and package dimensions august 1999, rev. b 0.165 to-220 tube packing configuration: figur e 1.0 note/comments packaging option to-220 packaging information stan da rd (no f l ow code ) packaging type rail/tube qty per tube/box 45 box dimension (mm) 530x 130x 83 max qty per box 1,080 weight per unit (gm) 1.4378 s62z bulk 300 114x 102x 51 1,500 1.4378 fscint label fscint label 114mm x 102mm x 51mm eo70 immediate box 530mm x 130mm x 83mm intermediate box 300 units per eo70 box 5 eo70 boxe s per per interm ediate bo x 1500 uni ts maximum quantity per intermediate box an ti-stati c bubbl e sheets 45 units per tube conduct ive plastic bag 1080 uni ts maximum quantity per box 530mm x 130mm x 83mm intermediate box fscint label 12 tubes per bag note: all dim ensions are in inches f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l 1.300 .015 0.080 0.032 .003 0.275 0.275 0.160 0.800 0.450 .030 20.000 +0.031 -0.065 0.123 +0.001 -0.003 l ot: cbvk741b019 nsid: fdp7060 d/c1: d9842 spec rev: b2 spec: qty: 1080 qa rev: fairchild semiconductor corporation htb:b (fscint) fscint labe l samp le to-220 tube configuration: figure 4.0 to-220 packaging information: figure 2.0 to-220 bulk packing configuration: figure 3.0 2 bags per box packaging description: to-220 parts are ship ped normally in tube. the tube is made of pvc plastic treated with anti -stati c agent.these tubes in standard option are placed inside a dissipative plastic bag, barcode labeled, and placed inside a box made of recy cl ab le corrug ated pa pe r. on e b ox c on tai ns two ba gs max im um (see fi g. 1.0). and o ne or several o f these boxes are placed inside a labeled shipp ing bo x wh ic h c om es in d ifferen t si zes de pe ndi n g o n th e nu mber of parts ship ped. the other option comes in bulk as described in the packagin g information table. the unit s in this option are placed inside a small box laid w ith anti- static bubble sheet. these smaller boxes are individually labeled and placed ins ide a larger box (see fig. 3.0). these larger or intermediate boxes then will b e placed finally inside a labeled shipping box whic h still comes in different sizes depending on the number of units shipped.
to-220 (fs pkg code 37) to-220 tape and reel data and package dimensions, continued september 1998, rev. a 1:1 scale 1:1 on letter size paper dimensions shown below are in: inches [millimeters] part weight per unit (gram): 1.4378
to-263ab/d 2 pak packaging configuration: figure 1.0 components to-263ab/d 2 pak tape leader and trailer configuration: figure 2.0 cover tape carrier tape note/comments packaging option to-263ab/d 2 pak packaging information standard (no flow code) l86z packaging type reel size tnr 13" dia rail/tube - qty per reel/tube/bag 800 45 box dimension (mm) 359x359x57 530x130x83 max qty per box 800 1,080 weight per unit (gm) 1.4378 1.4378 weight per reel 1.6050 - moisture sensitive label drypack bag esd label f63tnr label 359mm x 359mm x 57mm standard intermediate box to-263ab/d 2 pak unit orientation fdb603al f 9835 fdb603al f 9835 fdb603al f 9835 fdb603al f 9835 f63tnr label sample static dissipative embossed carrier tape f63tnr label antistatic cover tape esd label electrostatic sensitive devices do no t shi p or sto re n ear stro ng electrostatic electro magn eti c, mag netic o r r adio active fi eld s tnr date pt numb er peel stren gth min ___ __ ____ __ ___g ms max _____________ gms caution moisture sensitive label customized label lot: cbvk741b019 fsid: fdb6320l d/c1: d9842 qty1: spec rev: spec: qty: 800 d/c2: qty2: cpn: n/f: f (f63tnr)3 leader tape 1520mm minimum or 95 empty pockets trailer tape 400mm minimum or 25 empty pockets packaging description: to-263/d 2 pak parts are shipped in tape. the carrier tape is made from a dissipative (carbon filled) polycarbonate resin. the cover tape is a multilayer film (heat activated adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. these reeled parts in standard option are shipped with 800 units per 13" or 330cm diameter reel. the reels are dark blue in color and is made of polystyrene plastic (anti- static coated). this and some other options are further described in the packaging information table. these full reels are individually barcode labeled, dry packed, and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. one box contains one reel maximum. and these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped. to-263ab/d 2 pak tape and reel data and package dimensions september 1999, rev. b
p1 a0 d1 p0 f w e1 d0 e2 b0 tc wc k0 t dimensions are in inches and millimeters tape size reel option dim a dim b dim c dim d dim n dim w1 dim w2 dim w3 (lsl-usl) 24mm 13" dia 13.00 330 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 4.00 100 0.961 +0.078/-0.000 24.4 +2/0 1.197 30.4 0.941 0.1.079 23.9 27.4 see detail aa dim a max 13" diameter option dim a max w3 w2 max measured at hub w1 measured at hub dim n dim d min dim c b min detail aa notes: a0, b0, and k0 dimensions are determined with respect to the eia/jedec rs-481 rotational and lateral movement requirements (see sketches a, b, and c). 10 deg maximum component rotation 0.9mm maximum 0.9mm maximum sketch c (top view) component lateral movement typical component cavity center line 10 deg maximum typical component center line b0 a0 sketch b (top view) component rotation sketch a (side or front sectional view) component rotation user direction of feed to-263ab/d 2 pak embossed carrier tape configuration: figure 3.0 to-263ab/d 2 pak reel configuration: figure 4.0 dimensions are in millimeter pkg type a0 b0 w d0 d1 e1 e2 f p1 p0 k0 t wc tc t d 2 pak o263ab/ (24mm) 10.60 +/-0.10 15.80 +/-0.10 24.0 +/-0.3 1.55 +/-0.05 1.60 +/-0.10 1.75 +/-0.10 22.25 min 11.50 +/-0.10 16.0 +/-0.1 4.0 +/-0.1 4.90 +/-0.10 0.450 +/-0.150 21.0 +/-0.3 0.06 +/-0.02 to-263ab/d 2 pak tape and reel data and package dimensions, continued august 1999, rev. b
to-263ab/d 2 pak (fs pkg code 45) to-263ab/d 2 pak tape and reel data and package dimensions, continued august 1998, rev. a 1:1 scale 1:1 on letter size paper dimensions shown below are in: inches [millimeters] part weight per unit (gram): 1.4378
trademarks acex? coolfet? crossvolt? e 2 cmos tm fact? fact quiet series? fast ? fastr? gto? hisec? the following are registered and unregistered trademarks fairchild semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. life support policy fairchild?s products are not authorized for use as critical components in life support devices or systems without the express written approval of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. product status definitions definition of terms datasheet identification product status definition advance information preliminary no identification needed obsolete this datasheet contains the design specifications for product development. specifications may change in any manner without notice. this datasheet contains preliminary data, and supplementary data will be published at a later date. fairchild semiconductor reserves the right to make changes at any time without notice in order to improve design. this datasheet contains final specifications. fairchild semiconductor reserves the right to make changes at any time without notice in order to improve design. this datasheet contains specifications on a product that has been discontinued by fairchild semiconductor. the datasheet is printed for reference information only. formative or in design first production full production not in production disclaimer fairchild semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function or design. fairchild does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. syncfet? tinylogic? uhc? vcx? isoplanar? microwire? pop? powertrench qfet? qs? quiet series? supersot?-3 supersot?-6 supersot?-8 ? rev. d
to-220 tape and reel data and package dimensions august 1999, rev. b 0.165 to-220 tube packing configuration: figur e 1.0 note/comments packaging option to-220 packaging information stan da rd (no f l ow code ) packaging type rail/tube qty per tube/box 45 box dimension (mm) 530x 130x 83 max qty per box 1,080 weight per unit (gm) 1.4378 s62z bulk 300 114x 102x 51 1,500 1.4378 fscint label fscint label 114mm x 102mm x 51mm eo70 immediate box 530mm x 130mm x 83mm intermediate box 300 units per eo70 box 5 eo70 boxe s per per interm ediate bo x 1500 uni ts maximum quantity per intermediate box an ti-stati c bubbl e sheets 45 units per tube conduct ive plastic bag 1080 uni ts maximum quantity per box 530mm x 130mm x 83mm intermediate box fscint label 12 tubes per bag note: all dim ensions are in inches f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l f 9852 ndp4060l 1.300 .015 0.080 0.032 .003 0.275 0.275 0.160 0.800 0.450 .030 20.000 +0.031 -0.065 0.123 +0.001 -0.003 l ot: cbvk741b019 nsid: fdp7060 d/c1: d9842 spec rev: b2 spec: qty: 1080 qa rev: fairchild semiconductor corporation htb:b (fscint) fscint labe l samp le to-220 tube configuration: figure 4.0 to-220 packaging information: figure 2.0 to-220 bulk packing configuration: figure 3.0 2 bags per box packaging description: to-220 parts are ship ped normally in tube. the tube is made of pvc plastic treated with anti -stati c agent.these tubes in standard option are placed inside a dissipative plastic bag, barcode labeled, and placed inside a box made of recy cl ab le corrug ated pa pe r. on e b ox c on tai ns two ba gs max im um (see fi g. 1.0). and o ne or several o f these boxes are placed inside a labeled shipp ing bo x wh ic h c om es in d ifferen t si zes de pe ndi n g o n th e nu mber of parts ship ped. the other option comes in bulk as described in the packagin g information table. the unit s in this option are placed inside a small box laid w ith anti- static bubble sheet. these smaller boxes are individually labeled and placed ins ide a larger box (see fig. 3.0). these larger or intermediate boxes then will b e placed finally inside a labeled shipping box whic h still comes in different sizes depending on the number of units shipped.
to-220 (fs pkg code 37) to-220 tape and reel data and package dimensions, continued september 1998, rev. a 1:1 scale 1:1 on letter size paper dimensions shown below are in: inches [millimeters] part weight per unit (gram): 1.4378
to-263ab/d 2 pak packaging configuration: figure 1.0 components to-263ab/d 2 pak tape leader and trailer configuration: figure 2.0 cover tape carrier tape note/comments packaging option to-263ab/d 2 pak packaging information standard (no flow code) l86z packaging type reel size tnr 13" dia rail/tube - qty per reel/tube/bag 800 45 box dimension (mm) 359x359x57 530x130x83 max qty per box 800 1,080 weight per unit (gm) 1.4378 1.4378 weight per reel 1.6050 - moisture sensitive label drypack bag esd label f63tnr label 359mm x 359mm x 57mm standard intermediate box to-263ab/d 2 pak unit orientation fdb603al f 9835 fdb603al f 9835 fdb603al f 9835 fdb603al f 9835 f63tnr label sample static dissipative embossed carrier tape f63tnr label antistatic cover tape esd label electrostatic sensitive devices do no t shi p or sto re n ear stro ng electrostatic electro magn eti c, mag netic o r r adio active fi eld s tnr date pt numb er peel stren gth min ___ __ ____ __ ___g ms max _____________ gms caution moisture sensitive label customized label lot: cbvk741b019 fsid: fdb6320l d/c1: d9842 qty1: spec rev: spec: qty: 800 d/c2: qty2: cpn: n/f: f (f63tnr)3 leader tape 1520mm minimum or 95 empty pockets trailer tape 400mm minimum or 25 empty pockets packaging description: to-263/d 2 pak parts are shipped in tape. the carrier tape is made from a dissipative (carbon filled) polycarbonate resin. the cover tape is a multilayer film (heat activated adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. these reeled parts in standard option are shipped with 800 units per 13" or 330cm diameter reel. the reels are dark blue in color and is made of polystyrene plastic (anti- static coated). this and some other options are further described in the packaging information table. these full reels are individually barcode labeled, dry packed, and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. one box contains one reel maximum. and these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped. to-263ab/d 2 pak tape and reel data and package dimensions september 1999, rev. b
p1 a0 d1 p0 f w e1 d0 e2 b0 tc wc k0 t dimensions are in inches and millimeters tape size reel option dim a dim b dim c dim d dim n dim w1 dim w2 dim w3 (lsl-usl) 24mm 13" dia 13.00 330 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 4.00 100 0.961 +0.078/-0.000 24.4 +2/0 1.197 30.4 0.941 0.1.079 23.9 27.4 see detail aa dim a max 13" diameter option dim a max w3 w2 max measured at hub w1 measured at hub dim n dim d min dim c b min detail aa notes: a0, b0, and k0 dimensions are determined with respect to the eia/jedec rs-481 rotational and lateral movement requirements (see sketches a, b, and c). 10 deg maximum component rotation 0.9mm maximum 0.9mm maximum sketch c (top view) component lateral movement typical component cavity center line 10 deg maximum typical component center line b0 a0 sketch b (top view) component rotation sketch a (side or front sectional view) component rotation user direction of feed to-263ab/d 2 pak embossed carrier tape configuration: figure 3.0 to-263ab/d 2 pak reel configuration: figure 4.0 dimensions are in millimeter pkg type a0 b0 w d0 d1 e1 e2 f p1 p0 k0 t wc tc t d 2 pak o263ab/ (24mm) 10.60 +/-0.10 15.80 +/-0.10 24.0 +/-0.3 1.55 +/-0.05 1.60 +/-0.10 1.75 +/-0.10 22.25 min 11.50 +/-0.10 16.0 +/-0.1 4.0 +/-0.1 4.90 +/-0.10 0.450 +/-0.150 21.0 +/-0.3 0.06 +/-0.02 to-263ab/d 2 pak tape and reel data and package dimensions, continued august 1999, rev. b
to-263ab/d 2 pak (fs pkg code 45) to-263ab/d 2 pak tape and reel data and package dimensions, continued august 1998, rev. a 1:1 scale 1:1 on letter size paper dimensions shown below are in: inches [millimeters] part weight per unit (gram): 1.4378
trademarks acex? bottomless? coolfet? crossvolt? e 2 cmos tm fact? fact quiet series? fast fastr? gto? the following are registered and unregistered trademarks fairchild semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. life support policy fairchild?s products are not authorized for use as critical components in life support devices or systems without the express written approval of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. product status definitions definition of terms datasheet identification product status definition advance information preliminary no identification needed obsolete this datasheet contains the design specifications for product development. specifications may change in any manner without notice. this datasheet contains preliminary data, and supplementary data will be published at a later date. fairchild semiconductor reserves the right to make changes at any time without notice in order to improve design. this datasheet contains final specifications. fairchild semiconductor reserves the right to make changes at any time without notice in order to improve design. this datasheet contains specifications on a product that has been discontinued by fairchild semiconductor. the datasheet is printed for reference information only. formative or in design first production full production not in production disclaimer fairchild semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function or design. fairchild does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. supersot?-8 syncfet? tinylogic? uhc? vcx? hisec? isoplanar? microwire? pop? powertrench qfet? qs? quiet series? supersot?-3 supersot?-6 ? rev. e ?

▲Up To Search▲

Price & Availability of FDB5690

	To Download FDB5690 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .